System Settings; Display Illumination; Display Reversal; Reset To Factory Default Setting - thomann Stairville All FX Bar User Manual

Operating

7.6 System settings

7.6.1 Display illumination

7.6.2 Display reversal

7.7 Reset to factory default setting

20
1.
Press [MENU] repeatedly, until the display shows 'SYS' and confirm with
[ENTER].
2. Press [UP] or [DOWN] and select 'LEdS' and confirm with [ENTER].
3. Press [UP] or [DOWN] and choose between 'on' (display lighting is switched off
after 35 seconds) and 'oFF' (display lighting is permanently switched on).
4. Confirm the selection with [ENTER].
5. To return to the main menu without making changes, press [MENU].
1.
Press [MENU] repeatedly, until the display shows 'SYS' and confirm with
[ENTER].
2.
Press [UP] or [DOWN] and select 'LEdr' and confirm with [ENTER].
3.
Press [UP] or [DOWN] and choose between 'on' (display is rotated by 180°) and
'oFF' (display is in standard orientation).
4. Confirm the selection with [ENTER].
5.
To return to the main menu without making changes, press [MENU].
1. Press [MENU] repeatedly, until the display shows 'SYS' and confirm with
[ENTER].
2.
Press [UP] or [DOWN] and select 'rESt' and confirm with [ENTER].
3.
Press [UP] or [DOWN] and choose between 'no' (cancel reset) and 'YES' (reset
to factory settings).
4.
Confirm the selection with [ENTER].
ð The device is reset to the factory settings without a security query.
5. After the reset, the device restarts and the display shows 'U100' .
6. To return to the main menu without making changes, press [MENU].
LED effect