thomann Stairville All FX Bar User Manual page 11

Safety switch (emergency stop)
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules
that apply in your country. Always secure the device with a secondary
safety attachment, such as a safety cable or a safety chain.
NOTICE!
Risk of overheating
The distance between the light output and the illuminated surface must
be more than 2.0 m (78.7 in).
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a
safe and stable position and that the weight of the device does not
exceed the maximum permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
Connect the optional remote-control safety switch to the corresponding socket of
the device. If you press the switch, the laser beam will be switched off immediately.
To unlock the switch and resume operation, turn the knob clockwise.
All FX Bar
Installation
11