Check The Control Log Of Extention Software [Control Log] - i-PRO WV-S71300-F3 Operating Instructions Manual

How to set the schedules
1.
Select software for which an operation schedule is set from the extension software list.
2.
At [Operating day of week], select a day of week and a time table where the operation schedule is to be
set.
3.
Specify a period of time on "Time table 1" and "Time table 2" where the schedule is to be executed.
To execute for 24 hours, specify the period of time as [00:00] - [00:00].
4.
Click the [Set] button after completing the settings.
Note
•
"AI-VMD" is set as the default on the schedule setup screen of the extension software. For [Operation
content] of "AI-VMD", Off/Detection program1/Detection program2 are available. For further
information, refer to the operating instructions of the AI-VMD.
3.3.3 Check the control log of extention software [Control log]
The control log about the extension software will be displayed.
Up to 200 control logs can be saved on the built-in memory of the camera.
When the saved control logs have reached the maximum number, the newer logs will overwrite the older control
logs. In this case, the oldest log is the first to be overwritten.
The control logs will be displayed in group of 100 logs each, and the logs will be saved even when the power
of the camera is turned off.
[Next 100 >>]
When clicking "Next 100 >>", the next 100 control logs will be displayed.
[Number of pages display]
The currently opened page will be displayed in the "page/total page" format.
[<< Previous 100]
When clicking "<< Previous 100", the previous 100 control logs will be displayed.
[No.]
The serial number of the control log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
[Description]
The descriptions about the control log will be displayed. For further information about the control logs, refer to
our technical information website <Control No.: C0317>.
3 Detailed Settings
Operating Instructions 47