Open Source Software; Trademarks And Registered Trademarks; Precautions For Installation - i-PRO WV-S1536LTN Installation Manual

Open Source Software

• This product contains open source software licensed under GPL (GNU General Public License), LGPL
(GNU Lesser General Public License), etc.
• Customers can duplicate, distribute and modify the source code of the software under license of GPL
and/or LGPL.
• For details concerning licensing and source code of open source software, click "Click here for OSS
information" on "Support" page of the setup menu of this product and read the displayed content.
• Please note that we shall not respond to any inquiries regarding the contents of the source code.
Copyright
Except for open source software licensed under GPL/LGPL and so on, distributing, copying,
disassembling, reverse compiling and reverse engineering of the software provided with this product are
all expressly prohibited. In addition, exporting any software provided with this product violating export
laws is prohibited.

Trademarks and registered trademarks

• Microsoft, Windows, Windows Media, Microsoft Edge, and ActiveX are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
• Intel and Intel Core are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
• Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe in the United
States and/or other countries.
• microSDXC Logo is a trademark of SD-3C, LLC.
• iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
• Android and Google Chrome are trademark of Google LLC.
• Firefox is a trademark of the Mozilla Foundation in the US and other countries.
• The word "QR Code" is a registered trademark of DENSO WAVE INCORPORATED in Japan and other
countries.
• All other trademarks identified herein are the property of their respective owners.

Precautions for installation

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures
arising out of improper installation or operation inconsistent with this documentation.
„ In order to prevent injury, the product must be securely mounted to an installation
surface according to Installation Guide.
„ Installation area for this product
Select an appropriate place for the installation area (such as a strong installation surface) in your particular
environment.
• Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.
• Install the camera in the foundation area of the architecture or where sufficient strength is assured.
• Do not mount the product on a plaster board or a wooden section because they are too weak. If the
product is unavoidably mounted on such a section, the section shall be sufficiently reinforced.
• S1536LNS S1536LNS The camera has heavy salt damage resistance treatment applied, but this does not ensure
complete resistance against corrosion. Please pay attention to the installation location such as in places
where seawater does not splash directly. Prepare heavy salt damage resistance treatment for the
foundation of the installation site, and installation support such as pole mounts.
„ Do not place this product in the following places
• Locations where a chemical agent is used such as a swimming pool
• Locations subject to moisture or oil smoke such as a kitchen
5