Set Mask Areas - i-PRO WV-S71300-F3 Operating Instructions Manual

•
Unavailable characters: " & \
[Load] button
Loads the setting data selected in "Scene file" and changes the current image accordingly.
[Register] button
The combination of settings used to adjust image quality that are currently displayed can be registered to the
scene file displayed in "Scene file".

3.6.4.2 Set mask areas

This explains how to mask an area of the image and adjust brightness.
1.
Display the "Image adjust" setup menu. (®"3.6.4 Configure the settings relating to image adjust, privacy
zone, VIQS, and lens distortion compensation [Image quality]")
2.
Click "+" on the left of "Intelligent Auto" to display the detailed intelligent auto menu.
•
To set a white balance mask area, click "+" on the left of "White balance" to display the detailed white
balance menu.
3 Detailed Settings
Operating Instructions 95