Alarm: Configure Vmd, Scd, And Audio Detection (Alarm Setup Menu) - i-PRO WV-S71300-F3 Operating Instructions Manual

3 Detailed Settings
[Trigger]
•
Alarm: Select when setting the alarm detection settings.
•
Schedule: Select during "SD memory recording".
•
Default: Alarm
[SD memory card format]
To format the SD memory card, click the [Execute] button.
Once you click the [Execute] button, the "Format" confirmation screen will be displayed.
If you click the [OK] button, the formatting will start.
Once the "Format" completion screen is displayed, press the
IMPORTANT
•
All data saved on the SD memory card will be deleted when the SD memory card is formatted.
•
Do not turn off the power of the camera during formatting.
[Next] button
If you select "Alarm", and click the [Next] button, the alarm setup menu will be displayed. (®"3.4.2.2 Alarm:
Configure VMD, SCD, and audio detection (alarm setup menu)")
If you select "Schedule", and click the [Next] button, the schedule function type setup menu will be displayed.
(®"3.4.2.6 Schedule: Configure SD recording or SFTP periodic image transmission (schedule function type
setup menu)")
3.4.2.2 Alarm: Configure VMD, SCD, and audio detection (alarm setup
menu)
The settings relating to actions when an alarm is detected can be configured in this section.
Alarm
[VMD alarm]
•
On: If the VMD area is not configured, the entire region is configured. To configure the VMD area, use the
[VMD area] tab on the "Alarm" page. (®"3.8.4 Set the VMD areas [VMD area]")
•
Off: Disables all VMD states.
•
Default: Off
[SCD alarm]
•
On: If the SCD area is not configured, the entire region is configured. To configure the SCD area, use the
[SCD area] tab on the "Alarm" page. (®"3.8.5 Configure the SCD settings [SCD area]")
•
Off: Disables all SCD states.
•
Default: Off
52 Operating Instructions
button.