Configure The Lldp Settings - i-PRO WV-S71300-F3 Operating Instructions Manual

[Payload]
Set the MQTT message payload.
•
Available number of characters: 1 - 128 characters
•
Available characters: Alphanumeric characters, 1-byte symbols
•
Unavailable characters: "\"
•
Default:
VMD: VMD alarm
Audio detection: audio
Command alarm: cmd
[QoS]
Select the QoS level from 0, 1, 2. The communication quality improves in the order of 0<1<2.
•
0: The message is delivered at most once with QoS0. There is no guarantee that the message will reach
the server.
•
1: The message is delivered at least once with QoS1. The message is guaranteed to reach the destination,
but may be duplicated.
•
2: The message is delivered exactly once with QoS2. It guarantees that the message arrives just once.
•
Default: 1
[Retain]
Check this box if you want the MQTT server to save the last notified message.
•
Default: Unchecked

3.10.2.11 Configure the LLDP settings

Using LLDP (Link Layer Discovery Protocol) allows you to achieve interoperability by sending and receiving
the camera's device information to and from LLDP-compatible devices.
[LLDP]
Select "Enable" or "Disable" to determine whether to enable the LLDP function and Fabric Attach.
•
Default: Disable
When set to "Enable", LLDP including TLVs with the checks in the table below will be sent.
End Of Chassis
LLDPDU ID TLV
TLV
* Models that support PoE+ power supply will send LLDP including TLVs with the checks in the table below
for PoE+ power supply even if set to "Disable".
End Of Chassis
LLDPDU ID TLV
TLV
Port ID Time To Port
TLV Live TLV Description
TLV
Port ID Time To Port
TLV Live TLV Description
TLV
System System System
Name Description Capability
TLV TLV TLV
System System System
Name Description Capability
TLV TLV TLV
3 Detailed Settings
Management IEEE802.3 Fabric
Address TLV Power via Attach
MDI TLV Element
TLV
Management IEEE802.3 Fabric
Address TLV Power via Attach
MDI TLV Element
TLV
Operating Instructions 151