Page 1
“<Control No.: C****>” used in these documents should be used to search for information on our technical information website (https://i-pro.com/global/en/surveillance/training_support/support/technical_information) and will guide you to the right information. • microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 About notations ..........................4 System requirements for a PC ...................... 4 Network security ........................... 5 Precautions for use ........................6 Parts and functions ........................8 Insert / remove a microSD memory card ..................13 Troubleshooting ...........................
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic i-PRO Sensing Solutions Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:...
The following items indicate the color of dome cover. The functions with this notation are available when using the model with the i-PRO white body. The functions with this notation are available when using the model with the black body.
IMPORTANT: • For information on the operation verification of the supported web browsers, refer to our support website <Control No.: C0132>. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. •...
Precautions for use When the product is accessible from the Periodically images on the screen appear to Internet be distorted To prevent unauthorized access, note the following. When the camera is installed in a location where • Leave user authentication turned on. it is subject to small vibrations (for example, when •...
Page 7
Cleaning the lens About HEVC High Efficiency Video Coding patents Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using Covered by one or more claims of the HEVC solvent, use an alcohols solvent and do not use a patents listed at patentlist.accessadvance.com.
Parts and functions The following are descriptions when using the model WV-S22700-V2L. ■ Terminals [3] [4] [1] [1] Network connector (RJ45) [2] Power supply terminal (12 V DC) [3] Audio input connector [4] Audio output connector [5] EXT I/O terminals...
Page 9
[2] Power supply terminal (12 V DC) / Power cord plug (accessory) Connect the output cable of the DC power supply to the power cord plug. IMPORTANT: • Be sure to use the power cord plug provided with this product. •...
Page 10
[5] EXT I/O terminals / EXT I/O terminal plug (accessory) Note: • Off, input, and output of the ALARM IN2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions for further information about the ALARM IN2 and 3 settings (“Off”, “Alarm input”, “Alarm output”...
Page 11
227V2L 226V2L ⑥ SD ON/OFF button 225V3L The above illustration represents WV-S22700-V2L ① INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) Follow the steps below to initialize the network camera. ⑴ Turn off the power of the camera.
Page 12
④ SD indicator Lights off → Blinks green → • When a microSD memory card is inserted and could be recognized Lights off Lights off → Lights green • When data can be saved after the microSD memory card is inserted and the SD ON/OFF button is pressed (less than 1 second) •...
Insert / remove a microSD memory card Note: • Use a microSD memory card dedicated to i-PRO cameras. • Refer to the Operating Instructions on our support website for further information about the microSD memory card settings. ■ Insert a microSD memory card ①...
Page 14
Instructions on our manual website for how to format a microSD memory card. • When some microSD memory cards are used with this product, the product may not work properly or performance deterioration may be caused. Use a microSD memory card dedicated to i-PRO cameras.
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using a PoE device for power supply...
Page 16
Reference Symptom Cause/solution pages • Check the following. • Grounding of the camera, a switching hub or periph- eral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces Audio input contains Installation strong magnetic field or radio waves (such as near a...
Detail specifications Basic • Power source * DC 12 V PoE (IEEE802.3af compliant) Power consumption * 227V2L 226V2L 225V3L DC 12 V: 1.0 A/Approx. 12.0 W PoE DC 48 V: 240 mA/Approx. 11.5 W (Class 0 device) 225F6L 225F3L DC 12 V: 880 mA/Approx.
Page 18
*1 Refer to our support website <Control No.: C0106> for further information about Power source and Power consumption information. 227V2L 226V2L This camera is not equipped with the function to change the audio output to the monitor output. 225V3L 225F6L 225F3L The audio output can be switched to the monitor output.
Page 19
Minimum illumination: <WV-S22700-V2L><WV-S22700-V2L1><WV-S22600-V2L> Color: 0.04 lx {0.0037 footcandle} (30IRE, F1.5, Maximum shutter: Off (1/30 s), AGC: 11)* 0.06 lx {0.0056 footcandle} (50IRE, F1.5, Maximum shutter: Off (1/30 s), AGC: 11) 0.004 lx {0.0004 footcandle} (50IRE, F1.5, Maximum shutter: max. 16/30 s, AGC: 11)* BW: 0 lx {0 footcandle} (50IRE, F1.5, Maximum shutter: Off (1/30 s), AGC: 11, when the...
Page 20
Minimum illumination: <WV-S22500-F6L> Color: 0.08 lx {0.0075 footcandle} (30IRE, F1.6, Maximum shutter: Off (1/30 s), AGC: 11)* 0.11 lx {0.0103 footcandle} (50IRE, F1.6, Maximum shutter: Off (1/30 s), AGC: 11) 0.007 lx {0.0007 footcandle} (50IRE, F1.6, Maximum shutter: max. 16/30 s, AGC: 11)* BW: 0 lx {0 footcandle} (50IRE, F1.6, Maximum shutter: Off (1/30 s), AGC: 11, when the IR LED is lit)
Page 21
Off/ On(IR Light Off)/ On(IR Light On)/ Auto1(IR Light Off)/ Auto2(IR Light On)/ Auto3(SCC) IR LED Light: High/ Middle/ Low/ Off <WV-S22700-V2L><WV-S22700-V2L1><WV-S22600-V2L> Maximum irradiation distance: 50 m {Approx. 164 ft} (30IRE)* 35 m {Approx. 116 ft} (50IRE) <WV-S22700-V2LG><WV-S22600-V2LG><WV-S22500-F6L> Maximum irradiation distance: 35 m {Approx. 115 ft} (30IRE)* 25 m {Approx.
Page 22
Lens • Zoom ratio: 227V2L 226V2L Optical zoom 2.0× (Motorized zoom / Motorized focus) Extra optical zoom Max 6.0× (2.0× – 6.0× when resolution is 1280×720) 225V3L Optical zoom 3.1× (Motorized zoom / Motorized focus) Extra optical zoom Max 9.3× (3.1×...
Page 27
<Control No.: C0132>. *5 When using MJPEG/JPEG (Refresh interval) only. *6 Use a microSD memory card dedicated to i-PRO cameras. *7 For possible number of images and duration (an indication) that can be saved on the microSD memory card, refer to our support website below.