Table of Contents
Advertisement
15 Maintenance of the camera [Maintenance]
15 Maintenance of the camera [Maintenance]
System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The "Maintenance" page has the [System log] tab, the [Upgrade] tab, [Status] tab, the [Default reset] tab, and
the [Data] tab.
15.1 Check the system log [System log]
Click the [System log] tab on the "Maintenance" page. (®page 32, page 34)
Up to 100 system logs can be saved on the built-in memory of the camera. When the saved system logs have
reached the maximum number, the newer logs will overwrite the older system logs. In this case, the oldest log
is the first to be overwritten.
The system logs will be saved even when the power of the camera is turned off.
[No.]
The serial number of the system log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
Note
•
When "Off" is selected for "Time display format" on the [Basic] tab (®page 38), time & date of logs will
be displayed in 24-hour format.
[Description]
The descriptions about the system log will be displayed. Refer to page 190 for further information about the
system logs.
15.2 Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (®page 32, page 34)
182
Operating Instructions
Advertisement
Table of Contents
