Program Mode Controls - Universal Audio Ampex ATR-102 Manual

Program Mode Controls

The details of each unique program mode are below, followed by descrip-
tions of the global controls, which affect all program modes.
Control Table 10
Functions
the EMT 250 program modes. See
page 114
Table 10. The variable control functions of the EMT 250
Program Mode
Reverb
Delay
Phase
Chorus
Echo
Space
*Note: The parameter values of lever positions marked with an asterisk are not saved in sessions or presets.
The Program Mode buttons define which of the available program modes is
Program Mode
active. The six program modes are: Reverb (REV), Delay (DEL), Phase (PHAS),
Chorus (CHOR), Echo, and Space (SPC).
Click a Mode button to activate that program mode; the button is illuminated
for the currently active mode (only one mode can be active at a time). Each
program mode and its associated parameters are described in detail below.
Tip:
each program mode.
UAD Powered Plug-Ins Manual
displays the parameter that each control is mapped to for each of
for details.
Lever 1 Lever 2
Reverb Decay LF Decay
Coarse Delay Time Fine Delay Time
Phase (curve) (none)*
(none)* (none)*
Coarse Delay Time Fine Delay Time
(none)* (none)*
See Table 10 on page 117
"Variable Control Functions" on
Lever 3
HF Decay (damping)
Selects L/R channel
for time adjustment*
(none)*
Variation
HF Decay (damping)
(none)*
for a matrix of controls that are available in
- 117 - Chapter 10: EMT 250 Electronic Reverberator
Lever 4 Front/Rear
Predelay Output Pair
Predelay Stereo/Mono
Predelay Output Pair
Predelay Stereo/Mono
Predelay Input Mute
Predelay Output Pair