Neve 1081Se; Neve 1081 Latency - Universal Audio Ampex ATR-102 Manual

Neve 1081SE

Figure 71. The Neve 1081SE plug-in window
Overview The UAD Neve 1081SE is derived from the UAD Neve 1081. Its algorithm
has been revised in order to provide sonic characteristics very similar to the
1081 but with significantly less DSP usage. It is provided to allow 1081-like
sound when DSP resources are limited. Nobody with "golden ears" will say
it sounds exactly like the 1081, but it still sounds great and is very usable in
most situations.
The 1081SE interface can be differentiated from the 1081 by color and the
module name. The 1081SE is black instead of the 1081's dark blue, and the
module name on the lower right of the interface panel includes "SE".
Neve 1081SE The Neve 1081SE controls are exactly the same as the Neve 1081. Please re-
Controls
fer to the Neve 1081 section for Neve 1081SE control descriptions (see
"Neve 1081 and 1081SE Controls" on page

Neve 1081 Latency

The Neve 1081 (but not the 1081SE) uses an internal upsampling technique
to facilitate its amazing sonic quality. This upsampling results in a slightly
larger latency than other UAD plug-ins. See Chapter 9 "UAD Delay Compen-
sation" in the UAD System Manual for more information.
The Neve 1081SE does not require additional latency compensation because
it is not upsampled.
Note:
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-Neve's trademarks are being made with written permission from AMS-Neve Limited.
UAD Powered Plug-Ins Manual
Compensating for Neve 1081 is not required if the host application
223).
- 228 - Chapter 24: Neve 1081 Equalizer