Little Labs Ibp Latency - Universal Audio Ampex ATR-102 Manual

Phase Adjust This switch determines the range of the Phase Adjust parameter. This is useful
90°/180°
when finer Phase Adjust resolution is desired.
When the switch is disengaged, the Phase Adjust range is 180°. When the
switch is engaged (darker), the Phase Adjust range is 90°.
This switch sets the range of frequency emphasis. When the switch is disen-
Phase Center
Lo/Hi
gaged (lighter), the Phase Center range is Hi. When the switch is engaged
(darker), the Phase Center range is Lo.
Note:
dividual tone signals such as a kick drum or toms as opposed to program ma-
terial.
This switch disables the plug-in. When the switch is disengaged, the plug-in is
Power
bypassed. When the switch is engaged (darker), the plug-in is active and the
green LED is illuminated.

Little Labs IBP Latency

The Little Labs IBP uses an internal upsampling technique. This upsampling re-
sults in a slightly larger latency than other UAD plug-ins. See Chapter 9 "UAD
Delay Compensation" in the UAD System Manual for more information.
Note:
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs.
UAD Powered Plug-Ins Manual
Use of the 90°/180° and Lo/Hi parameters are typically used for in-
Compensating for Little Labs IBP is not required if the host application
- 181 - Chapter 18: Little Labs IBP