Ambience Recovery - Universal Audio Ampex ATR-102 Manual

Ambience Recovery

Refer to
Figure 88. The Ambience Recovery controls
Recover Enable This switch enables/disables the ambience recovery process. See
Recovery" on page 286
Recover Enable must be engaged for the Ambience Gain, Enhance
Deep/Wide, and Ambience Filters controls to have an effect.
Note:
Power controls.
Ambience Gain The Ambience Gain knob controls the level of recovered ambience. The de-
fault 0 dB position is defined as the nominal or "typical" setting (ambience re-
covery is occurring when set to 0 dB).
Increase or decrease Ambience Gain to change the amount of recovered am-
bience. The range is -20 dB to +9 dB, available in 0.5 dB steps. Click the "0"
label to quickly return to 0 dB. To disable ambience recovery, use the Recover
Enable switch.
Note:
Enhance The ambience recovery process can be manipulated further with the Deep
and Wide switches.
Note:
is engaged.
Deep
Provides deeper ambience recovery when the switch engaged.
Wide
Spreads and enhances the stereo image when the switch is engaged.
UAD Powered Plug-Ins Manual
Figure 88 below for the controls in this section.
for an overview.
This switch does not have any effect on the M/S Gain, L/R Gain, or
Values below 0 dB do not remove ambience.
The Enhance functions can only be enabled when the Recover switch
- 288 - Chapter 33: Precision K-Stereo Ambience Recovery
"Ambience