Universal Audio Ampex ATR-102 Manual page 337

First material
First material
selector pop-
First material
Figure 108. RealVerb Pro Material panel
Note:
quency, the overall decay rate of the late-field reverberation is controlled from
the Timing panel (see
To configure the room material and thickness:
1.
2.
• A default thickness of +100% yields normal, real-world decays for the ma-
• Thicknesses beyond the default (up to +200%) exaggerate how the frequen-
• Negative thicknesses invert the response of the material. If the material nor-
• A thickness of 0% yields decay rates that are not affected by the material.
3.
UAD Powered Plug-Ins Manual
up menu
Thickness
control
While materials are used to control decay rates as a function of fre-
Select a room material from the first (left) pop-up menu. The selected mate-
rial appears in the left side of the Material circle.
Adjust the thickness for the first material with the top horizontal slider:
terial.
cies are absorbed and reflected.
mally absorbs high frequencies (causing them to decay quickly) and reflects
low frequencies (causing them to decay slowly), a negative thickness will in-
stead absorb low frequencies (causing them to decay quickly) and reflect
high frequencies (causing them to decay slowly).
Select a material from the second (right) pop-up menu. The selected mate-
rial appears in the right side of the Material circle. Adjust the material thick-
ness with the bottom horizontal slider.
Figure 110 on page
- 337 -
Second
material
Blending bar
Second material
selector pop-up
menu
Second material
Thickness control
342).
Chapter 38: RealVerb Pro