Gleaner ® S9 Series Combines; Setting Up Header - Gleaner S9 Series - MacDon FlexDraper FD75 Operator's Manual

4.13 Gleaner ® S9 Series Combines
To make your header's auto header height control (AHHC) system compatible with Gleaner
set your combine's header configuration options for the particular model of header, configure the controls and reel speed
settings, and calibrate the AHHC system to ensure that it is working correctly.
4.13.1 Setting up Header – Gleaner
The initial configuration options on a Gleaner
control (AHHC) system is being set up.
NOTE:
Changes may have been made to the combine controls or the display since this document was published. Refer to the
combine operator's manual for the most up-to-date information.
The AGCO Tyton terminal is used to set up and manage a
MacDon header on a Gleaner
touch screen. Touch the terminal screen to select an item.
1. On the top right of the home page, touch COMBINE
icon (A). The COMBINE MAIN MENU appears.
214323
AUTO HEADER HEIGHT CONTROL
® S9 Series
®
S9 Series combine will need to be configured when the auto header height
® S9 combine. The terminal has a
A
B
C
Figure 4.142: Gleaner
A - Tyton Terminal B - Hydro Handle/Ground Speed Lever
C - Throttle Lever D - Header Control Cluster
Figure 4.143: Combine Icon on Home Page
202
®
S9 Series combines, you must
D
®
S9 Terminal Screen
A
Revision B