DeWalt XR DCMCS574 Original Instructions Manual page 45

g
Wear ear protection.
f
Wear eye protection
Wear head protection.
Wear gloves.
Wear proper foot protection.
Do not expose the tool to rain or high humidity or leave
outdoors while it is raining.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating the chainsaw.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from the tool.
Directive 2000/14/EC guaranteed sound power.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture,
18
is printed into the housing.
Example:
2021 XX XX
Year and Week of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Variable speed trigger switch
1
Lock-off lever
2
Chain brake / front hand guard
3
Guide bar
4
Saw chain
5
Sprocket cover
6
Bar lock nuts
7
Chain tensioning screw
8
Oil level indicator
9
Oil cap
10
Guide bar scabbard
11
Rear handle
12
Front handle
13
Battery housing
14
Battery Pack
15
Battery release button
16
Wrench
17
Date code
18
Intended Use
The DCMCS574 chainsaw is designed for cutting logs up to
40 cm in diameter.
The DCMCS575 chainsaw is designed for cutting logs up to
45 cm in diameter.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
These chainsaws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
Inserting and Removing the Battery Pack
from the Tool (Fig. D)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
1. Align the battery pack
15
battery housing 14 (Fig. D).
2. Slide it into the battery housing until the battery pack is
firmly seated in the tool and ensure that you hear the lock
snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
battery pack out of the tool.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. C)
Some D WALT battery packs include a fuel gauge which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button 19 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
EnGLIsh
WALT battery packs and chargers.
e
is fully charged.
15
with the rails inside the tool's
and firmly pull the
16
43