Acknowledge; No Acknowledge; Host Initiated Command Packets; Reset Unit - Lexicon MC-8 User Manual

Lexicon

6.2.1 Acknowledge

6.2.1.1 Packet Description
6.2.1.2 Data Description
Command:
DataType:

6.2.2 No Acknowledge

6.2.2.1 Packet Description
6.2.2.2 Data Description
Command:
DataType:
ErrorCode:
DataType:

6.3 Host Initiated Command Packets

The MC-8 serial communication protocol has been designed to respond to the following commands as
described below. Each command is transmitted to the MC-8 with the identified parameters. If the
command is successfully received and processed by the MC-8, the unit will respond with the described
response packet or action.

6.3.1 Reset Unit

Commands the MC-8 to soft reset.
Application Header:
Command
Data Count
Application Data:
Data[0]
Valid MC-8 command as defined in the Command Codes table
(Appendix A page 35).
Application Header:
Command DC_NACK
Data Count 2
Application Data:
Data[0] Command
Data[1] ErrorCode
Valid MC-8 command as defined in the Command Codes table
(Appendix A page 35).
Error code as defined in the Error Codes table
MC-8 Serial Communications Protocol
DC_ACK 0xE0
1 0x01
Command nn
0xE1
0x02
nn
nn
(Appendix B page 36).
11