RUKO F11GIM2 User Manual page 27

Camera Guideline:
Please take off the gimbal camera cover before flight.
①
When taking off from grass or sand, please place the aircraft on
②
the landing pad or cardboard to keep it level.
Do not turn on the aircraft when it is on desk or hollow wooden floor.
③
They will amplify the small vibrations into high-frequency vibrations,
which will cause the gimbal cannot work.
Do not interfere with the gimbal by putting external forces or
④
picking up the aircraft during calibration. Otherwise, the gimbal will
stop to work.
Touching the camera
On the grass
On the desk
F1 1 GIM 2 User Manual
On the sand
On the hollow wooden floor
Picking up the Aircraft
(during self-inspection)
Copyright ©2022 Ruko All Rights Reserved.
25