Charging The Controller; Drone; Preparing The Aircraft - RUKO F11GIM2 User Manual

F1 1 G IM 2 User Manual

6.5 Charging the Controller

Phone Adapter: 5V--3A
USB Adapter
The Remote Control Is Charging
When the remote control is charging, the LED screen will indicate
the battery level, when fully charged, it will indicate "BAT 100 PCT"
Controller is built-in 3.7V 1500mAh lithium polymer battery. Use the
original type-C cable to connect an AC power adapter (5V/3A) to
charge. It takes apporximately 2hours to full charge the remote
controller. The charing time depends on what adapter are using,
suggest to use charger with output currency
overcharge.

7 Drone

7.1 Preparing the Aircraft

All aircraft arms are folded before ship out of the factory. Please
follow the steps below to unfold the arms.
Take off the Gimbal Cover
Unfold the front arms
22
Copyright ©2022 Ruko All Rights Reserved.
(Not Included)
(5V/3.0A)
Charging Time: About 2 Hours
(Depending on Charging Adapter)
Fully Charged With Remote Control
5V/3A.Never