Advertisement
User Guide
1.3. Activation of test
mode with software
"SonoMeter 40
Configurator"
© Danfoss | Energy Meters | 2021.09
SonoMeter 40
The test mode can be activated via the optical interface using the software "SonoMeter 40
Configurator" and optical scan head in accordance with EN 62056-21 standard. In this case, optionally
volume or energy pulses are generated via the optical interface of the meter.
ON TEST (E Pulse) mode – intended for test (TEST) mode activation (with energy pulse output via
optic interface).
ON TEST (V Pulse) mode – intended for test (TEST) mode activation (with volume pulse output via
optic interface).
OFF TEST mode – intended for deactivation of the test (TEST) mode.
Start E-test – intended for energy measurement stimulating volume for 150 sec operations (only in
the Service mode).
BC389148615526en-010101 | 5
Advertisement
