Gecko Aeware3 in.touch Quick Start Manual

Specifications:
Environmental ratings:
Humidity: Up to 85% non condensing
Operating temp.: -20˚C (-4˚F) to +60˚C (-140˚F)
Storage temp.: -30˚C (-22˚F) to + 85˚C (185 ˚F)
Regulatory Compliance Information
United States
Contains FCC ID: W7OZG2100-ZG2101
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
To satisfy FCC RF Exposure requirements for mobile and
base station transmission devices, a separation distance
of 20 cm or more should be maintained between the
antenna of this device and persons during operation.
To ensure compliance, operation at closer than this
distance is not recommended. The antenna(s) used for
this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Scan this QR code for more info
www.geckoalliance.com/intouch
© Groupe Gecko Alliance Inc., 2012
450 des Canetons, Quebec City (Qc), G2E 5W6 Canada, 1.800.78.GECKO
All trademarks or registered trademarks
9225 Stellar Court, Corona, CA 92883 USA, 951.667 .2000
are the property of their respective owners.
www.geckoalliance.com
US Pat. 6782309, 7489986 and other patents pending.
Canada
Contains IC: 8248A-G21ZEROG
Europe
The MRF24WB0MA/MRF24WB0MB module has been
certified for use in European countries. The following
testing has been completed:
Test standard ETSI EN 300 328 V1.7 .1 (2006-10):
• Maximum Transmit Power
• Maximum EIRP Spectral Density
• Frequency Range
• Radiated Emissions
Test standards ETSI EN 301 489-1:2008 and ETSI EN 301
489-17:2008:
• Radiated Emissions
• Electro-Static Discharge
• Radiated RF Susceptibility
The modules are fully compliant with
• Radiated Emissions EN 55022
• Electrostatic Discharge EN 61000-4-2
• Radiated Immunity EN 61000-4-3
• EN 60950-1
• CE-Mark
• RoHS
RoHS
C O M P L I A N T
The product must be disposed of separately
in accordance with the local waste disposal
legislation in force.
Specifications and design are subject to change
without prior notice.
®
Gecko Alliance
Printed in Canada 03-2012
A Cool New App for Spas
in.touch
You're always in touch with your relaxation.
Intuitive layout!
Easy to manage all functions
with one touch!
The options are unlimited!
Key features:
• Pick the water care setting
that matches your schedule!
• Create the ideal spa experience
every time you use your spa!
www.geckoalliance.com
Creating products. Building relationships.
™