decon E-Drive PLUS User Manual page 80

ƒ Insert the power plug of the dedicated
charger (ESC3) into the residential power
outlet.
TIP After plugging in the charger, it takes about 5 seconds for the charging lamp to light.
„ Rest the battery on its side.
… Open the connector cover, and insert the
charger plug into the charge connector
on the battery.
† Check that the charge lamp (green) on
the charger turns on.
If the charge lamp does not light green,
see "9.6. Charger (ESC3) Indicator
Lamps".
‡ While charging, you can check the
charge status using the capacity indica-
tor lamps on the battery.
The capacity indicator lamps will turn off
after charging has completed.
Assuming that charging started with the
battery in an empty state, the time to
completion is typically 4.5 hours.
Power plug
Residential power outlet
Connector cover
Charge lamp
Charging
Charging starts
Charging complete
Charger plug
Turn on successively
All lamps turn off
Charging complete
9
73