decon E-Drive PLUS User Manual page 94

(2) Returning the retracted anti-tip device to its
original position
Turn the anti-tip device outward without touching
the lock lever until you hear a click.
Make sure that the anti-lock device is locked in
position.
● Operating the wheelchair when the anti-tip device is removed or not in the correct
position may cause a rollover. Make sure you operate the wheelchair with the safety
wheels facing downwards.
● Only have the safety wheels facing upwards when going over bumps with the as-
sistant operations and other such situations.
● Make sure you return the safety wheels to the correct position after going over the
bump.
● A road surface with large depressions can cause a rollover, even if the safety wheels
are facing downwards. When going over bumps, also pay close attention to the con-
dition of the road surface.
● Even if the anti-tip device is in the correct position, the wheelchair could rollover
due to various factors, such as a bumpy road surface, holes, level differences, and
slopes.
Make sure that the road you use frequently on a daily basis is safe beforehand.
WARNING
11
87