decon E-Drive PLUS User Manual page 98

(4) Insert the controller into the lower holder.
(5) To return the controller to its original position, reverse the procedure.
11.3.2. Parallel arm type controller holders
Adjusting the mounting position of the controller
• Adjusting the Horizontal position
The Mounting position can be adjusted for 3 positions of Center, inner and outer side.
(1) Turn off the power switch.
(2) Adjusting the position of controller while the
lock lever of the holders is pulled up.
(3) After release the lock lever, the controller
position is fixed with lock position.
Lower holder
11
Lock lever
Inner side
Outer side
91