How To Use The Assistant Controller; Getting In The Wheelchair; Starting Assistant Travel Mode - decon E-Drive PLUS User Manual

6.

How to Use the Assistant Controller

Even if you are using the wheelchair with assistive operation, read "3. Before Sitting in the
Wheelchair", "4. Riding the Wheelchair", "5. After You are Finished Riding the Wheelchair".
6.1.

Getting in the Wheelchair

Have the user get in the wheelchair according to "4.1. Sitting in the Wheelchair".
6.2.

Starting Assistant Travel Mode

(1) Switch the left and right clutches to
the power drive position.
(2) Turn on the power for the assistant controller.
When you turn on the power, the lamp display changes as
shown in the lower-right figure.
When you turn on the power switch, if the battery residual
capacity is less than 10%, the warning lamp flashes, and a
buzzer beeps "Pi Pi Pi Pi" (4 times). Charge the battery at
your earliest convenience.
6
46
24"
The battery residual capacity lamp
indicates the current battery residual
capacity.
After 1 second
All lamps turn on.
16"
Power Reverse Forward
switch switch switch
The warning
The power lamp
lamp (red)
(green) stays lit.
turns off.