Push in each power unit completely. Check to en-
sure that the two balls "a" on the end of the axle
can be seen completely.
Pull each power unit to ensure that it will not come
off.
Place the power units in their normal position, and
then apply the parking brakes.
Remove the cap from the connector on the
left wheel.
Align the white dot (arrow mark) on the con-
nector at the end of the cable with the white
dot on the connector on the wheel side, and
t h e n p u s h i n t h e c a b l e c o n n e c to r u nt i l i t
clicks.
C onnec t t he c able w it h an L mar k to t he
c o n n e c t o r w i t h a n L m a r k (o n t h e w h e e l
side), and connect the cable with an R mark
to t h e c o n n e c to r w i t h a n R m a r k (o n t h e
wheel side).
M ake sure t hat t he c onnec tor will not be
disconnected.
● When you install the right wheel on models that feature an integrated battery, sup-
port the battery storage compartment to prevent the wheel from turning. Other-
wise, the wheel might turn, possibly causing damage to the switch or the battery
storage compartment.
Connector
(on the cable side)
White dot
Connector
(on the wheel side)
White dot
NOTICE
a
11
Cap
85