decon E-Drive PLUS User Manual page 21

● When crossing a street at a crosswalk with no traffic light, pay sufficient atten-
tion to the traffic.
● If there is a pedestrian signal light, obey the signal light. If the signal light is
flashing green or is red, you must not start to cross the road.
1
● If the street is wide, the signal may change before you finish crossing. In such
places, wait for the next green light to give yourself enough time to cross the
street.
● At intersections where there are no traffic lights or crosswalks, stop in the fol-
lowing three stages.
1. Stop before entering the road.
2. Stop where you can be seen by automobiles.
3. Stop where you have a good view of the road.
1.5.10. Railroad Crossings
● Avoid railroad crossings if you can go around them.
● If you have no choice but to travel over a railroad crossing, have an assistant
accompany you.
● Be sure to stop before the railroad crossing and check to the left and right for
safety.
● When traveling over a railroad crossing,
proceed as close as possible at a right
angle to the railroad tracks. If you travel
diagonally, the wheelchair casters may get
caught in the railroad tracks.
● Be careful not to travel too close to the edge when traveling over a railroad
crossing. Otherwise, the wheels could accidentally move off the railroad cross-
ing.
If case of an emergency, do not panic. Have the assistant or a person around
you switch the clutch lever to the manual side and move off the railroad cross-
ing as quickly as possible.
14
WARNING
WARNING