decon E-Drive PLUS User Manual page 68

TIP Assuming the charging process started from an empty state, the time it takes from
start to completion of the charging process is typically 2.5 to 3 hours.
If charging in a location with a high temperature or if charging a brand new battery,
this may take longer.
… Check to ensure that charging is complete.
When charging is complete, the battery ca-
pacity indicator lamps and the charge lamp
(green) on the charger turn off.
After charging is complete, you can check
the charged capacity by pressing the battery
indicator switch.
If not all of the lamps turn on, the following
could have occurred:
• While charging, the temperature of the
battery rose excessively, causing the
protection mechanism to abort the
charging process.
• The battery deterioration has advanced
and the capacity is decreasing.and so
on.
 Unplug the power cord from the power outlet.
● Do not pull on the power cord. This can cause the wires to break.
 Remove the battery from the charger.
If you want to store the battery in this state,
put the protective cap on.
Capacity indicator
lamps
(all lamps turn off)
NOTICE
Charge lamp (green)
(all lamps turn off)
80 – 100%
60 – 80%
40 – 60%
20 – 40%
1 – 20%
(flashes at approx. 10%)
Indicator
switch
Protective cap
61
8