Using The Wheelchair More Comfortably; Removing And Installing The Unit - decon E-Drive PLUS User Manual

11. Using the Wheelchair more Comfortably

E-Drive PLUS has a variety of features to improve its controllability. Use these features according
to your purposes. For information on the wheelchair frame to which E-Drive PLUS is attached, see
the manual from the wheelchair manufacturer.

11.1. Removing and Installing the Unit

The power units of E-Drive PLUS can be removed from the frame when replacing the current
wheels with manual wheels or when transporting the wheelchair.
(1) Removing the power units from the frame
 Turn off the power and remove the battery. Put the protective cap on the removed
battery.
‚ Switch the left and right clutches to
the power drive position.
ƒ Turn the connector ring at the end of
the cable counterclockwise while
pulling the connector up to discon-
nect the cable.
On models that feature an integrated battery seat, the connector is located on the left wheel.
TIP
On models that feature a detachable battery seat, a connector is located on both
the left and right wheel.
Connector
Ring
11
83