decon E-Drive PLUS User Manual page 82

… Check that the charge lamp (green) on the
charger turns on.
If the charge lamp does not comes on green,
see "9.6. Charger (ESC3) Indicator Lamps".
† While charging, you can check the charge
status using the capacity indicator lamps on
the battery.
The capacity indicator lamps will turn off after
charging has completed.
Assuming that charging started with the bat-
tery in an empty state, the time to completion
is typically 4.5 hours.
‡ After charging has completed, unplug the
charger plug and the power plug, then securely
close the battery's connector cover.
● Do not pull on the power cord. This can cause the wires to break.
Connector cover
Charger plug
NOTICE
Charge lamp
Charging
Turn on successively
Charging starts
All lamps turn off
Charging
Charging
complete
complete
Power plug
9
75