After Assistant Operations Are Finished - decon E-Drive PLUS User Manual

6.3.

After Assistant Operations are Finished

(1) Park the wheelchair on a flat location.
(2) Turn off the power switch.
(3) Apply the parking brakes.
(4) Set the left and right clutch levers in the power drive
position.
(5) Have the user get off the wheelchair.
(6) Disconnect the battery from the wheelchair.
Store the battery with the protective cap on it.
● After having finished travelling in assistant power driver mode, be sure to turn the power
off.
If the power is on when the user get off the wheelchair, the body may hit against the
switches, causing it to start moving, and you or other people in your surrounding may get
injured.
● Get off the wheelchair in a level and stable location. If you park the wheelchair on an
incline and try to get off it from there onto a bed or a chair, the user may lose the balance
and fall off the wheelchair.
● If the user get off the wheelchair with the left and right clutch levers in the manual posi-
tion and with the parking brakes released, the wheelchair may move unexpectedly, caus-
ing the user to fall off and injure himself/herself. When getting off the wheelchair, make
sure that the left and right clutch levers are in the power drive position and the parking
brakes are applied.
● Be sure to store the disconnected battery with the
protective cap on it. Exposed contacts can cause
short circuits and lead to a fire or battery rupture.
Power
switch
WARNING
WARNING
6
Protective cap
49