Moving The Wheelchair - decon E-Drive PLUS User Manual

4.2.

Moving the Wheelchair

(1) Turn on the power switch (yellow).
When the power to the wheelchair is turned on, all the lamps on the controller illumi-
nate. Then, after 1 second, the "retracted anti-tip device" warning lamp turns off, and
the battery residual capacity indicator indicates the battery level.
"Retracted anti-tip device"
warning lamp
Battery residual capacity indicator
Fully charged
Battery residual capacity warning:
When the battery residual capacity becomes less than 10%, the residual capacity lamp
flashes, and a short buzzer beeps "Pi Pi Pi Pi" (4 times).
4
(2) If necessary, adjust the maximum speed.
For the adjustment method, refer to 4.3. Adjusting and
Confirming the Maximum Speed.
(3) Release the parking brakes.
(4) The wheelchair starts moving when you tilt the joystick to
the desired direction.
Make sure that the joystick returns to its neutral position
and the wheelchair stops properly when you release the
joystick.
For beginners, refer to pages 47 and 48, and practice
the basic operations until you become familiar with them.
36
After 1
second
Battery residual
capacity indicator
Battery residual
Empty
capacity warning
Speed selector Power switch
switch (black) (yellow)