decon E-Drive PLUS User Manual page 67

(2) Charging
 Place the charger on a flat, stable surface
with the charge indicator lamp facing up.
‚ Insert the charger plug into the charger and
insert the power plug into the residential
power outlet.
Charger
8
 Insert the battery into the charger as shown
in the diagram.
After plugging in the charger, it takes about 5 seconds for the charging lamp to light.
TIP
 The charge lamp (green) on the charger
turns on, and the battery starts charging.
The capacity indicator lamps on the battery
flash, and the number of lamps that are lit
increases according to the charging level.
If the charge lamp (green) does not turn on,
and the refresh lamp (orange) flashes, refer
to "8.5. Refresh Charging the Nickel Metal
Hydride Battery (JWB2)".
60
Residential power outlet
Charger plug
Power plug
Power cord
Battery
Charger
Charge lamp (green)
Refresh lamp
(orange)
Charge lamp (green)