Device description
Device description
Device components
The electronic temperature controller is made up of the following components:
➜
Control unit [1]
➜
Connection cable to the magnetic stirrer (spiral cable, five-pin, hard-wired, with
connection plug in acc. with DIN 45322) [2]
➜
Bracket [3] for the control unit with two retaining clips ∅ 10 mm for fixing on a
wall grid or similar and two retaining clips ∅ 13 mm for fixing on the stay bar of a
magnetic stirrer:
➜
Sensor (hard-wired) [4]
30