PCchips M925G Series Manual page 29

DRAM CAS# This item determines the operation of
Latency DRAM memory CAS (column address
strobe). It is recommended that you leave
this item at the default value. The 2T
setting requires faster memory that
specifically supports this mode.
DRAM Bank Enable this item to increase DRAM
Interleave memory speed. When enabled, separate
memory banks are set for odd and even
addresses and the next byte of memory
can be accessed while the current byte is
being refreshed.
AGP Comp. Use this item to signal driving current on
AGP cards to auto or manual. Some
Driving
AGP cards need stronger than normal
driving current in order to operate. We
recommend that you set this item to the
default.
Manual AGP When AGP Driving is set to Manual, use
Comp. Driving this item to set the AGP current driving
value.
AGP Mode This item provides the OnBoard VGA
mode with three options of 1,2, 4
multiplied frequency.
AGP Aperture This item defines an AGP for the
Size graphics. Leave this item at the default
value 64MB.
Auto detect When this item is enabled, BIOS will
DIMM/PCI disable the clock signal of free
Clock DIMM/PCI slots.
CLK GEN Use this item to set the system bus
Spread Spectrum spread spectrum for the installed
processor.
23