PCI (Peripheral Components Interconnect) Slot
You can install the 32-bit PCI interface expansion cards in the
slots.
CNR1
PCI
1. Remove a blanking plate from the system case
corresponding to the slot you are going to use.
2. Install the edge connector of the expansion card into
the expansion slot. Ensure that the edge connector is
correctly seated in the slot.
3. Secure the metal bracket of the card to the system
case with a screw.
Connecting Optional Devices
Refer to the following for information on connecting the
motherboard's optional devices:
1
SPK1
1
USB2
15
AGP1
1
JUSBC
CD1
1