PCchips M925G Series Manual page 31

Suspend Time This sets the timeout for Suspend mode in
Out minutes. If the time selected passes without
any system activity, the computer will enter
power-saving Suspend mode.
Resume On The system can be turned off with a
RTC Alarm / software command. If you enable this item,
Date / Hour / the system can automatically resume at a
Minute / fixed time based on the system's RTC
Second (realtime clock). Use the items below this
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
LAN/Ring The system can be turned off with a
software command. If you enable this item,
Power On
the system can automatically resume if there
is an incoming call on the Modem. You
must use an ATX power supply in order to
use this feature.
Keyboard If you enable this item, system can
Power On automatically resume by pressing hot keys
Wake-Up Key on the keyboard or typing in the password.
Wake-Up You must enable the Keyboard Power On
Password jumper and use an ATX power supply in
order to use this feature.
25