Table of Contents
Advertisement
OnBoard FDC
Use this item to enable or disable the
onboard floppy disk drive interface.
OnBoard Serial
Use this item to enable or disable the
PortA
onboard COM1 serial port, and to assign a
port address.
OnBoard IR
Use this item to enable or disable the
Port
onboard infrared port, and to assign a port
address.
Parallel Port
Use this item to set the parallel port mode.
Mode
You can select SPP (Standard Parallel
Port), ECP (Extended Capabilities Port),
EPP (Enhanced Parallel Port), or ECP +
EPP.
Parallel Port
Use this item to assign IRQ to the parallel
IRQ
port.
Parallel Port
Use this item to assign a DMA channel to
DMA
the parallel port.
OnBoard IDE
Use this item to enable or disable the
onboard IDE channel.
This item enables or disables the AC'97
Audio Device
audio chip.
This item enables or disables the MC'97
Modem Device
modem chip.
This item enables or disables the onboard
Ethernet
Device
Ethernet LAN.
USB
Use this item to select the USB ports or
Controller
disabled.
USB Device
This item allows you to enable the USB
Legacy
device, if you have installed a USB device
Support
on the system board.
ThumbDrive
Enable this item to make a small portion of
Support For
memory storage device for the USB ports.
DOS
28
Advertisement
Table of Contents
