SmallRig MagicFIZ User Manual page 11

Method 1-2: Manual lens calibration with the Wireless Handwheel Controller
The automatic lens calibration lasts for over 20s, or click MARK "
mode automatically, Click MARK "
Lens Starting
Point
Method 2: Automatic lens calibration with Wireless Receiver Motor
Press and hold
click to confirm starting point and ending point.
CAL ?
3S
5. A-B Marks Setting
Wireless Handwheel Controller: Click MARK "
and B Mark for a customized limits; click again to cancel the A-B Marks.
999
Electronic Controller Module: Click
and B Mark; click
999
6. Reset Calibration
It is required to reset and calibrate the Wireless Handwheel Controller and Wireless Handgrip when:
1. The knob is turned to the end point and the motor is reversed rapidly.
2. The knob is turned to the end point and the non "000" or "999" position information is shown.
10
" to confirm starting point and ending point.
CAL
Manually
S E
to calibrate the lens automatically;
START
456
/
/ simultaneously to cancel the A-B Marks.
456
Finished
S
Lens Ending
Point
END
", the dotted line jumps; then click A Mark
999 000
999
simultaneously and click REC "
999
" to switch to manual
CAL
E
[Note]
For double display mode,
click "MARK" and then
click "SET" to switch
between the Wireless
Handwheel Controller
and Wireless Handgrip.
" to set A Mark