SmallRig MagicFIZ User Manual page 10

Wireless Handwheel Controller Single-Display Mode: Click SET "
number; click /
432
Wireless Handwheel Controller Double-Display Mode: Click SET "
number and switch the control; click
Electronic Controller Module Handgrip Mode: Press and hold
number; click /
4. Lens Calibration (automatic / manual)
Method 1-1: Automatic lens calibration with the Wireless Handwheel Controller
Press and hold MARK "
Mark
Confirm
to adjust the number; press and hold SET "
999
/
999 999
to adjust the number; press and hold
" to start the calibration; click
999 999
[Note]
F15
The motor can be controlled only
567
with same channel and motor
number.
to adjust the number; press and hold "SET" to exit.
to activate the motor
to exit.
999
/ to adjust the motor number.
[Note]
For double-display mode, it can identify
the available motor number;
For single-display mode, it can identify
999 the current motor number.
" to activate the motor
" to exit.
" to activate the motor
9