SmallRig MagicFIZ User Manual page 7

4.2 Use the standard USB-C to USB-C cable to connect the Wireless Handgrip for powering the
Wireless Receiver Motor, achieving the cabled control.
Wireless Receiver Motor
Port indication
4.3 Power the Wireless Receiver Motor through the Battery Plate.
Powered by the Battery Plate
Compatible with NP-F batteries
5. Instruction for REC Wiring
5.1 Connect one end of the control cable with the Wireless Receiver Motor and the other end with
the camera; wirelessly control the video REC recording through the
Wireless Handwheel Controller and Electronic Controller Module.
Wireless Receiver
Motor REC Port
Sony
ID: 2971
A7, A7R, A7S, A7II, A7RII, A7SII, A7SIII,
FX3, A7III, A7RIII, A7 IV, A7R IV, A9, A9 II,
A5100, A6000, A6100, A6300, A6400,
A6500, A6600, RX100 III, RX100IV,
RX100V, RX100 VI, RX100 VII
6
REC
FUJIFILM
ID: 2970
X-T3, X-T4,
X-T20, X-T30
Wired control and power
supply of the Wireless Handgrip
Wired Control of the
Wireless Handwheel Controller
Panasonic
ID: 3325
S5, S1, S1R, S1H,
BS1H, GH4, GH5,
GH5S, GH6, G9,
G95
Z CAM
E2, M4, S6
BGH1(Panasonic)