Basic Operation; Default Settings In Factory - Ribao JM-90 Instruction Manual

3. BASIC OPERATION

Step 1. Turn on the Power Switch.
Step 2. Set batch number by pressing 0-9 keys if necessary.
Step 3. Set Counting Speed, Auto or Manual Start function, DEN, UVD, MGD
functions if necessary.
Step 4. Load the notes onto the Hopper and set the right position to the Auxiliary
Plates. Then press RESTART key to start counting if necessary.

4. DEFAULT SETTINGS IN FACTORY

Turn the Power Switch on, the machine will be in the previous setting.
Turn on the Power Switch while pressing the RESTART key for 2 seconds, and the machine
will be in the default settings.
The default settings in factory are as follow:
Function
DEN
UVD
MGD
ADD
SPEED
MNL
Batch
11
ON
Settings Descriptions
Level 1: To count dark-colored (thick) notes.
DEN-1
UVD-11 Level 2: To count notes of middle UV sensitivity.
MGD-11 Level 2: To count notes of middle magnetic sensitivity.
OFF ADD function is off.
Speed-11 1200 notes/min.
OFF Auto Start is on.
100 100 sheets
OFF