BCS-160User Manual V1.6
7.
Check counting result and printing information
7.1 Check counting result
Under MIX mode or SDC mode, after counting, press
check the counting details as shown by Fig.16 :
This interface is for checking the quantity and amount for each
denomination you counted, as well as the total amount.
7.2 Check Suspected Notes Details and Serial Number
7.2.1 Check Suspected Notes Details
After finish counting, if there are suspected notes in reject pocket and
want to check reject reason, please press
following interface(Fig.17) to check detailed information. To exit from current
interface you can press ESC key or put notes on hopper to count directly.
Fig.16
Fig.17
20 / 57
key to
key to enter into