Advertisement
FM7100 Series
Multi-Point Lock
Installation Instructions
This device is intended to be part of an integrated door, frame and hardware assembly UL-approved for both FEMA P-361
(2014), FEMA P-320 (2015) & ICC 500 (2014) guidelines for both in-swing and out-swing doors.
1
Tools Needed
Supplied:
1/8 Hex
5/64 Hex
2
Mounting Hardware (Full Scale)
(4)
Oval Head Phillips
Flat Head Hex Soc ket
12-24x1 1/2"
(2)
Push-on
Retaining
Ring
(1 Spare)
1-800-727-5477 • www.sargentlock.com
Copyright © 2016, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or
patent www.assaabloydss.com/patents.
5/32 Hex
3/16 Hex
Hollow
Tip Dr iver
(3)
Flat Head He x Socket
12-24x1"
Flat
Phillips
Marker Chisel
Head
Head
(10)
Flat Head Socket
1/4-20x1"
5/16-18x1"
A8010G 08/22
Required:
Tape Measure
9/16" &11/16"
Drill
Wrench
(2)
(2)
Drop-in
Anchor
2
Anchor
Flashlight
Mallot
Set Tool
(2)
Drive Pin
(1 Spare)
Advertisement
