Assa Abloy Corbin Russwin FE5400S Series Installation Instructions Manual

Installation Instructions
FE5400S(A) Series
3 Point Exit Devices
Top Latch
Top
Chassis
Strike
Bottom Chassis
Bottom Strike
FM329 (11/18)
Top Chassis Cover
Upper Rod
Rod Guide
Bottom Rail
Dogging
Touch Bar
Front Cover
Rod Guide
Lower Rod
Bottom Chassis
Cover
In U.S.:
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
www.corbinrusswin.com
Technical Product Support: Phone: 888-607-5703
NOTE: To meet the certification
requirements, use fasteners and hardware
provided with this product. Factory
supplied fasteners & hardware must be
used to maintain product certification.
End Cap
End Cover
Key
Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
ASSA ABLOY
In Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, Canada L4K4T9
www.assaabloy.ca
WARNING
This product can expose
you to lead which is
known to the state of
California to cause cancer
and birth defects or other
reproductive harm. For
more information go to
www.P65warnings.ca.gov.
08/2018
Outside Trim
Device is packed ready for
any compatible trim.
Dogging
(Not a feature of fire labeled devices.)
Feature to hold bolts retracted and
touchpad depressed, for push-pull door
operation.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
Maintenance
1. Periodically remove covers and
coat mechanisms with a silicone
base lubricant. This is particularly
required in corrosive environments
for proper product function.
2. Check mounting fasteners
periodically. Retighten if found
loose. Apply screw locking
compound (available at automotive
part stores).
3. Periodic checks (and adjustments)
of strikes are required to
compensate for changes in the
opening (e.g. door sagging,
binding, etc...).
1 of 14
®