Yetter GERMINATE UNIFORMITY 2940 Operator's Manual page 16

2940-103A Control Box Internal Lay Out
INTERIOR HARNESS
(NO PART #)
2940-441A
PRESSURE
TRANSDUCER
(TANK SUPPLY)
2940-647
¼"NPT X 5/32PC
RUN TEE
2940-638
INLET
ASSEMBLY
2940-649
¼"NPT X
3/8PC RUN TEE
2940-376
WATER DRAIN
VALVE
AIR TUBING: 2940-345 3/8 AIRLINE, 100FT ROLL, 1200-337 ¼ AIRLINE, 100FT ROLL, 2940-651 5/32 AIRLINE, 100FT ROLL
Harness, Airlines, and Fittings Kit
12V-DC cables will be used to power the VDM & Thrasher. Flexible tubing will be used to move air from the tank to each
air bag. Each kit will include pneumatic lines for both circuits, down and lift, as well as the fittings to make connections and
cable ties to securely fasten the lines to the planter. Note: All 2940 Air Adjust kits include a tubing cutter within the kit. The
2940-341 airline cutter should be used for every cut to ensure a clean, square cut is made.
16
2940-112A MIDAC MODULE
(MOUNTED TO BACK WALL
2940-635 3/8NPT 2940-639 QUICK
X 3/8PC ELBOW EXHAUST REG ASSEMBY
2940-637
VALVE ASSEMBLY
9010-345 3/8NPT X
3/8NPT STRAIGHT FITTING
2940-640
MAC BV VALVE
2940-652
12 X 14 X 8
ENCLOSURE
2940-642
10-32 X
5/32PC
FITTING
2940-441A
PRESSURE
TRANSDUCER
(1 per circuit)
2940-644
¼"NPT TEE
2940-650
¼"NPT X ¼"PC
ELBOW