Related Manuals for Yetter 6200-022
Summary of Contents for Yetter 6200-022
- Page 1 6200-022/-023/-024 FIRMING WHEEL OPERATOR’S MANUAL PART IDENTIFICATION 2565-776 - 07/2013 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com...
-
Page 2: Warranty
WARRANTY Yetter Manufacturing warrants all products manufactured and sold by it against defects in material. This warranty being expressly limited to replacement at the factory of such parts or products as shall appear to be defective after inspection. - Page 3 SAFETY A brief description of signal words that may be used in this manual: CAUTION: Used as a general reminder of good safety practices or to direct attention to unsafe practices. WARNING: Denotes a specific potential hazard. DANGER: Denotes the most serious specific potential hazard. SAFETY PRECAUTIONS You can make your farm a safer place to live and work if you observe the safety precautions given.
-
Page 4: Bolt Torque
BOLT TORQUE Mounting bolts and hardware Before operating the 6200 Packer Wheel for the first time, check to be sure that all hardware is tight. Check all hardware again after approximately 50 hours of operation and at the beginning of each planting season. All hardware used is Grade 5 unless otherwise noted. - Page 5 ASSEMBLY STEP 1. Attach the packer wheel mount bracket to the planter row unit using the provided hardware as illustrated for each model of planter.
- Page 6 ASSEMBLY STEP 2. Attach the v-closing wheel assembly to the packer wheel mount bracket. 1 x 12 are not shown for clarity of illustrations, 1 x 12 wheels are intended to be used with the 6200 packer wheel.
- Page 7 ASSEMBLY STEP 3. Attach the spring stop, spring and height adjustment to the packer wheel arm.
- Page 8 ASSEMBLY STEP 4. Attach the packer wheel arm assembly to the mount bracket.
- Page 9 ASSEMBLY STEP 5. Attach the 6.5” x 12” wheel to the packer wheel arm.
- Page 10 OPERATION PLANTER ADJUSTMENT Refer to planter manufacturer’s manual for specific measurements and techniques on frame height adjustment.
-
Page 11: Operation Adjustment
OPERATION ADJUSTMENT... -
Page 12: Parts Identification
PARTS IDENTIFICATION... - Page 13 PARTS IDENTIFICATION...
- Page 14 PARTS IDENTIFICATION...
- Page 15 NOTES:...
- Page 16 East, the South, the West and now north into Canada. We’re even getting orders from as far away as Australia and Africa. So, when you buy Yetter products . . .you’re buying a name that’s recognized. A name that’s known and respected. A name that’s become a part of American agriculture and has become synonymous with quality and satisfaction in the field of conservation tillage.