Figure 13 Installation Area And Service Area (When The Lifter Is Used) - Fujitsu ETERNUS AX Series Manual

1. ETERNUS AX/HX Installation
Installation Area
When DS460C drive shelves (60-drive) are installed in a rack or being maintained, temporary space is required to
use the lifter around the rack.
Figure 13 Installation Area and Service Area (When the Lifter Is Used)
Rear service area
Top 19-inch rack
Front service area
500 mm or more
*1: If a service area in front of the rack can be secured, secure a size 1,800mm or more.
■
Precautions for Installing a DS460C Drive Shelf (60-Drive) in a Rack
• A lifter must be used to ensure safety during the installation of the drive shelf in the rack. Secure a space
required to use the lifter.
• When a drive is added or replaced, the front left and right of the rack must be secured as service areas to pull
out the drawer.
• The drive shelf weighs a maximum of 115 kg. Be sure to maintain the load bearing capacity of the location
where the drive shelves are installed.
850 mm or more
1,020 mm or more (*1)
1,000 mm or more
29 Site Planning Guide