Fujitsu ETERNUS AX Series Manual page 7

Preface
Trademarks
Third-party trademark information related to this product is available at:
https://www.fujitsu.com/global/products/computing/storage/eternus/trademarks.html
About This Manual
Intended Audience
This manual is intended for managers of facilities where the ETERNUS AX/HX is installed.
Related Information and Documents
The latest information for your model is available at:
https://www.fujitsu.com/global/support/products/computing/storage/manuals-list.html
Document Conventions
■ Notice Symbols
The following notice symbols are used in this manual:
Start of Production for This Product
Production for the ETERNUS AX1100/AX2100/AX4100 and ETERNUS HX2100/HX2200/HX6100 has started from
2020.
Production for the ETERNUS AX2200 has started from 2021.
Indicates information that you need to observe when using the ETERNUS AX/HX. Make
sure to read the information.
Indicates information and suggestions that supplement the descriptions included in
this manual.
7 Site Planning Guide