Figure 40 Four-Node Configuration Using Cluster Switches (Nexus 9336C) (For 40Gbase Port Connections) - Fujitsu ETERNUS AX Series Manual

2. Rack Installation Specifications
Rack Installation Requirements
●
Cables between Nodes and Switches (40GBASE Port Breakout Connection)
Split the 40GBASE port into four 10GBASE ports (breakout connections).
Two cables are required for every two HA pairs (four nodes).
Two cables are also required for a single HA pair (two nodes). In this case, half the terminals of the breakout
cables are left unconnected.
Figure 40 Four-Node Configuration Using Cluster Switches (Nexus 9336C) (for 40GBASE Port Connections)
Node
Node
57
Cables used between nodes and switches
Node
Node
Site Planning Guide